DocuCard Hotline
1614
Headland Dr
Fenton, MO 63026
DocuCard® Tips are available to help facilitate DocuCard use. For additional information, please contact the DocuCard Hotline at 800-942-0384 or drop us an e-mail!
Fusing
The following outlines tips for achieving optimum toner fusing on DocuCards with a 4135,
4635, 4635MX, 6135, DP96, DP180, 6180, 6100 or a Docutech 135.
Fuser Lubricant:
Use fuser AGENT, part #8R2955. Do not use fuser SHIELD, part #8R4077.
Variable Data Position:
Because of the difference in thickness between the carrier sheet and the card, quality
imaging is not possible around the edges of the card or window. Do not image on the
document or cards within ¼" of the edge of the card.
Fuser Temperature:
Since we will be fusing on the card and the document, have the Xerox service
representative set the fusing temperature at the high end of the nominal temperature
range.
Fuser Contact Arc:
Set at specified width uniform across the roll length.
Duplex Imaging:
Always image the front side of the DocuCard first, then the
back side. Note- When imaging WindoWell DocuCards, change the machine speed
from pitch 7 to pitch 5. This will slow the machine down and allow more space
between documents in the duplex inverter. If you run WindoWell DocuCards at pitch 7,
the edge of the document catches on the edge of the window when two sheets pass each other
in the duplex inverter.
Engineering Resource:
Please contact Michele Shugerts in Webster if you have more technical questions
regarding fusing on DocuCards. Michele can be reached via phone at (585)
422-5516, via
fax at (585) 422-0012 or via e-mail.